Now carefully locate the manufacturerвЂ™s label and note the model number.This important as Using this information you should be able to buy an exact match for your broken screen.your replacement screen should have all of these cables in it already. On the right side of the screen you have your wireless antenna wires and the webcam conroller wire, Your replacement screen should have all of these in it already. Next will be 2 thin wires which control the 2 mics located by the webcam on this monitor. Otherwise, this would have an LED-backlit LCD and it only has one cable. Normally the laptops made before 2010 have LCDs with fluorescent backlights, it will likely have two cables. From left to right,Video cable, (the cable which controls all aspects of color and brightness on the LCD. Once you have removed the speaker bezel you will see a total of 6 wires coming from the bottom of the screen and feeding into the laptop. Then leave the display front-side-down on the case and disconnect its cable. You need to get your LCDвЂ™s mounting brackets exposed, then you can remove the screws that secure it to the lid. With the hidden screws removed, I used a thin metal blade to pop loose one of the bottom corners and worked my way around the bezel with a plastic spudger. So now you need to remove these cushions and the screws that are underneath. Then you will get to see several rubber cushions hiding screws, which hold the bezel in place. YouвЂ™ll need to remove this bezel to access the screws that hold the LCD panel in place. Yes it may work, but there's no way to be sure, I replaced LCDs on laptops before and of course it depends on the model some are harder to replace than others,ДЇirst, you need to disconnect the power supply and then after removing the battery you have to cautiously look at the bezel around the screen.

Dell latitude e6420 ebay